Makita BUK360 Instruction Manual page 13

Cordless cultivator
Hide thumbs Also See for BUK360:
Table of Contents

Advertisement

1
3
2
4
1
2
5
1. Direction of blade rotation
2. Blade facing inward
3. Blade facing outward
4. Left inner blades (outside view)
5. Left outer blades (outside view)
6. Right inner blades (outside view)
7. Right outer blades (outside view)
8. Outside
9. Back view
10. Lock pin
012928
There are two types of blades. Mount a blade in the right
direction as shown in the figure.
NOTE:
Mount the blades symmetrically on right and left sides.
Mount the lock pin and snap pin in in the right
direction shown in the figure so that it does not
come off by itself.
MAINTENANCE
1.
REMOVE THE LOCK KEY. Store it in a safe place
out of the reach of children.
2.
Remove mud, straw waste, weeds and the like from
the blade and the equipment. Clean your
equipment with running water. Do not run or splash
water in the electric part area (main switch, lock-off
switch, switch lever, motor, indication lamp). After
cleaning, wipe the equipment with a dry rag.
NOTE:
When cleaning the equipment with water, do not
fold the handle or do not keep the handle in contact
2
8
8
3
2
10
8
2
9
with the ground. Cleaning the equipment with the
handle folded
ground may cause the switch breakage.
When using a power washer to clean the equipment,
use an adjustable spray-type nozzle with as low power
dispersion as possible and keep the equipment more
than 2 m away from the equipment. Failure to do this
may cause removal of warning/caution labels, above-
mentioned-electrical part damage and flood into the
gearbox casing resulting in damage to mechanical
parts, such as gears, bearings and the like.
Follow warnings, cautions and instructions stated in
labels and instruction manual of the power washer
for proper use. Failure to do this may cause a
personal injury and failure, damage or breakage to
the equipment.
If the battery ports or the area around them should
be splashed with water or flooded during cleaning,
wipe it off with a rag immediately.
3.
Check all nuts, bolts, knobs, screws, fasteners etc.
for tightness.
13
1
2
3
3
2
6
1
2
7
or keeping in contact with the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Uk360d

Table of Contents