Technical Data; Defi Nitions: Safety Guidelines; Ec Declaration Of Conformity; Safety Instructions - DeWalt DW711 Original Instructions Manual

ENGLIS H
TABLE TOP MITRE SAW
DW711
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough product
E
development and innovation make D
partners for professional power tool users.

Technical Data

Voltage
Type
Power input
Power output
Max. blade speed
blade diameter
blade bore
Blade body thickness
Riving knife thickness
Riving knife hardness
Weight
CUTTTING CAPACITIES
Mitre saw mode
Mitre (max. positions)
Bevel (max. positions)
At 90˚, at max. height 50 mm,
max. width of cut
At 45˚ mitre, at max. height 50 mm,
max. width of cut
At 45˚ bevel, at max. height 45 mm,
max. width of cut
At 90˚, at max. depth of cut 96 mm, max width 20 mm, max. cut off 15 mm
Saw bench mode
Max. depth of cut
L (sound pressure)
PA
K (sound pressure uncertainty)
PA
L (sound power)
WA
K (sound power uncertainty)
WA
Vibration total values (triax vector sum) determined according to EN 61029:
Vibration emission value a
h
a =
h
Uncertainty K =
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 61029
and may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure.
WARNING: The declared vibration emission level represents
the main applications of the tool. However if the tool is used
for different applications, with different accessories or poorly
maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working
period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may
significantly reduce the exposure level over the total working
period.
24
WALT one of the most reliable
E
DW711 DW711-LX
V 230
6
W 1,300
W 900
min 2 950
-1
mm 260
mm 30
mm 2.0
mm 2.3
mm 43 ±5
kg 20
left 50˚
right 50˚
left 48˚
right 0˚
mm 134
mm 94
mm 134
mm 0-50
dB(A) 90
dB(A) 3
dB(A) 103
dB(A) 3.7
m/s² 1.9
m/s² 1.5
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work
patterns.
Fuses:
Europe
U.K. & Ireland
NOTE: This device is intended for the connection to a power supply system
115
with maximum permissible system impedance Zmax of 0.30 Ω at the
6
interface point (power service box) of user's supply.
1,100
The user has to ensure that this device is connected only to a power system
800
which fulfils the requirement above. If necessary, the user can ask the public
2 950
power supply company for the system impedance at the interface point.
260
Defi nitions: Safety Guidelines
30
The definitions below describe the level of severity for each signal word.
2.0
Please read the manual and pay attention to these symbols.
2.3
DANGER: Indicates an imminently hazardous situation which, if
43 ±5
not avoided, will result in death or serious injury.
20
WARNING: Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
50˚
NOTICE: Indicates a practice not related to personal injury
50˚
which, if not avoided, may result in property damage.
48˚
Denotes risk of electric shock.
0˚
Denotes risk of fire.
134
94 EC-Declaration of Conformity
MACHINERY DIRECTIVE
134
DW711
0-50
D WALT declares that these products described under "technical data" are
E
in compliance with:
2006/42/EC, EN 61029-1, EN 61029-2-11.
90
These products also comply with Directive 2004/108/EC. For more
3
information, please contact D
103
back of the manual.
3.7
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of D
1.9
1.5
Horst Grossmann
Vice President Engineering and Product Development
D WALT, Richard-Klinger-Straße 11,
E
D-65510, Idstein, Germany
01.01.2010

Safety Instructions

WARNING! When using electric tools basic safety precautions
should always be followed to reduce the risk of fire, electric
shock and personal injury including the following.
Read all these instructions before attempting to operate this product and
save these instructions.
SAVE THIS MANUAL FOR FUTURE REFERENCE
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugs
WALT at the following address or refer to the
E
WALT.
E