Philips Sonicare EssentialClean Instructions Manual page 10

ENGLISH
10
Note: If you press the power on/off & mode button
after you started the brushing cycle, the toothbrush will
pause. After a pause of 30 seconds, the Smartimer resets.
Easy-start
The Easy-start feature gently increases power over the
first 14 brushings to ease into the Sonicare experience.
Note: This Sonicare model comes with the
Easy-start feature deactivated.
To activate the Easy-start feature:
1 Attach your brush head to the handle.
2 Place the handle in the plugged-in charger.
3 Press and hold the power on/off & mode
button for 2 seconds. Your Sonicare beeps
twice and the battery level indicator flashes
green to indicate that the Easy-start feature
has been activated.
To deactivate Easy-start: Press and hold the power on/
off & mode button for 2 seconds. You hear 1 beep and
the battery level indicator flashes yellow to indicate
that the Easy-start feature has been deactivated.
Note: Each of the first 14 brushings must be at least
1 minute in length to properly move through the
Easy-start ramp-up cycle.
Note: Using the Easy-start feature beyond the initial
ramp-up period is not recommended and reduces
Sonicare's effectiveness in removing plaque.