Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for PheeNet WMS-208
Summary of Contents for PheeNet WMS-208
- Page 1 Network Access Control WMS-208 Quick Installation Guide Version 3.1...
-
Page 2: Package Contents
PheeNet WMS-208 is a Network Access Controller, specially designed for wired and wireless data network environments in small to middle scaled businesses and hotspots. This Quick Installation Guide provides instructions and reference material for getting started with the PheeNet WMS-208. This guide will also show how to connect PheeNet WMS-208 to other network equipments. -
Page 3: Hardware Introduction
WAN1/WAN2: Two WAN ports (10 Base-T / 100Base-TX RJ-45) are available on the system. LAN1~LAN8: Client machines connect to WMS-208 via LAN ports (10 Base-T / 100Base-TX RJ-45). Note: By Default, all LAN ports are set with Port-based Default Service Zone; for Service Zone configuration, please refer to section 4.1.7, User’... -
Page 4: Hardware Installation
Ethernet cable to an administrator’ s PC or a client PC, AP, or switch in managed network. The LED of the connected port should be on to indicate a proper connection. Attention: PheeNet WMS -208 supports Auto Sensing MDI/MDIX. You may use either straight through or cross-over cable to connect the Ethernet Port. -
Page 5: System Concept
This is very useful for hotspot owners seeking to provide different customers or staff with different levels of network services. The following diagram is an example of WMS-208 set to manage the Internet and network access services at a hotspot venue. -
Page 6: Web Interface Configuration
After a successful login, a “Welcome to System Administration” page will appear on the screen. For the first time, if the WMS-208 is not using a trusted SSL certificate , there will be a “Certificate Error”, because the browser treats WMS-208 as an illegal website. Please press “Continue to this website” to continue. - Page 7 PheeNet WMS-208 Quick Installation Guide Caution: If you can’ t get the login screen, the reasons may be: (1) The PC is set incorrectly so that the PC can’ t obtain the IP address automatically from the LAN port; (2) The IP address and the default gateway are not under the same network segment. Please use default IP address such as 192.168.1.xx in your network and then try it again.
-
Page 8: Configuration Wizard
PheeNet WMS-208 Quick Installation Guide 6. Click Next to begin. 2.3 Configuration Wizard 1. After a successful login to PheeNet WMS-208, a web management interface with a welcome message will appear. Step 1. Change Admin’s Password Note: To logout, simply click the Logout icon on the Ø... - Page 9 Ø NTP Server: Enter the URL of the external time server for PheeNet WMS-208 time synchronization or use the default setting. Ø DNS Server: Enter the IP Address of a DNS Step 4 (Cont).
-
Page 10: User Login
PheeNet WMS-208 Quick Installation Guide Ø While restarting WMS-208, a “Restarting now. Step 5. Add Local User Account (Optional) Ø A new user can be added to the Local User Please wait for a moment.” message will database. To add a user here, enter the appear on the screen. - Page 11 Service Zones, please refer to the User’s Manual, Appendix C. Service Zone Deployment Example. PheeNet WMS-208 can centrally manage up to 12 access points (APs). For how to set up the “AP Management” feature, please refer to the “AP Management”...
Need help?
Do you have a question about the WMS-208 and is the answer not in the manual?
Questions and answers