LANCOM WLC-4006 - LANCOM WLC-4025
Chapter 3: Basic configuration
3.1.2
Configuration protection
The password for configuration access to the LANCOM protects the configu-
ration against unauthorized access. The configuration of the device contains
a considerable amount of sensitive information such as your Internet access
information. We therefore strongly recommend protecting it with a password.
3.2
Instructions for LANconfig
34
Multiple administrators can be set up in the configuration of the
LANCOM, each with differing access rights. For a LANCOM, up to 16
different administrators can be set up. Further information can be
found in the section 'Managing rights for different administrators' in
the LCOS reference manual.
In the managed mode the LANCOM Wireless Routers and LANCOM
Access Points automatically receive the same root password as the
WLAN Controller, assuming that no root password has been set in the
device itself.
Start up LANconfig by clicking Start
LANconfig. LANconfig automatically detects the new LANCOM devices in
the TCP/IP network.
As standard, LANCOM Wireless Routers and LANCOM Access Points in
managed mode are not displayed by LANconfig carrying out its device
search. To display these devices, activate the option 'Extend search for
managed APs'.
Programs
LANCOM