Table of Contents
Advertisement
LANCOM WLC-4006 - LANCOM WLC-4025
Chapter 8: Providing dial- in access
Notes to the individual values:
8.1.2
Settings for TCP/IP
Each active RAS user must be assigned an IP address when using the TCP/IP
protocol.
This IP address can be permanently assigned when setting up a user. However,
it is simpler to let the LANCOM Router automatically assign free IP addresses
to users when they dial in. In this case you only need to specify the IP address
range that the LANCOM Router should use for RAS users.
During both manual and automatic IP address assignment, please ensure that
only free addresses from the address range of your local network are used. In
our example, the IP address '10.0.1.101' will be assigned to the PC when con-
necting.
This IP address makes the computer a fully-fledged member of the LAN: with
the appropriate rights, it can access all of the other devices in the LAN. The
same applies in the other direction as well: computers in the LAN will also be
able to access the remote machine.
8.1.3
Settings for NetBIOS routing
All that is required to use NetBIOS is the name of a Windows workgroup from
the router's own LAN.
102
User name and password: Users authenticate themselves with this
information when dialling in.
10.0.1.100
(0123) 123456
LAN of the head office.
IP: 10.0.1.0
VPN or ISDN
connection
User: 'SAMPLE'
(0123) 777888
Remote
workstation
IP:
10.0.1.101
ISDN adapter
Advertisement
Table of Contents
