Superior MNF24ONM Installation And Operation Instructions Manual page 11

Control
Valve
Figure 17- Disconnecting Switch from Control Valve
INSTALLING LOGS AND VOLCANIC STONE
WARNING: Failure to position the parts in
accordance with these diagrams or failure to
use only parts specifi cally approved with this
appliance may result in property damage or
personal injury.
CAUTION: After installation and periodically
thereafter, check to ensure that no fl ame comes
in contact with any log. With appliance set to
Hi, check to see if fl ames contact any log. If
so, reposition logs according to log installation
instructions in this manual. Flames contacting
logs will create soot.
LOG PLACEMENT
It is very important to install these logs exactly as instructed.
Do not modify logs. Only use logs supplied with appliance.
NOTE: Each log includes an identifying number cast in the
log. Look at each log when placing them on the burner system
to be certain it is correct.
1. Find the right front log (LMF24GTA/B or LMF24MOA/B
models: D-061, LMF30GTA/B or LMF30MOA/B models:
D-019, LMF36GTA/B or LMF36MOA/B models: D-027).
See Figures 18, 18A, 18B, and 18C for reference. The log
has a rectangular shape on the bottom that fi ts against the
lip on the black metal base, the square grate, and the round
tube burner. Slide the log in place as shown in Figures.
900465-01A
INSTALLATION
Continued
Burner
Tube
Switch
Grate Finger
Figure 18A - Installing Right Front Log, Top View
Burner Tube
Figure 18B - Installing Right Front Log, Top View
SuperiorFireplaces.us.com
Grate Finger
Figure 18 - Installing Right Front Log
Right Front Log
(D-061, D-019 or D027)
Round Tube
Burner
Square Grate
11