Connecting The Printer Using Usb; Connecting The Printer Using Your Wireless Network; Connecting The Printer To Your Wireless Network Using Wps; Connecting The Printer To Your Computer Using The Leitz Icon Add Printer Wizard - LEITZ ICON User Manual

Leitz Icon Printer User Guide

Connecting the Printer Using USB

1.In the Add Printer Wizard, select USB, and then click Next.
2.Plug the USB cable into the USB connector located on the back of the printer.
3.Plug the other end of the USB cable into an available USB port on your computer.
4.Click Close to close the Add Printer Wizard.
The necessary driver to print to your printer is installed. Once the installation is complete, you will be able to print your
first label.

Connecting the Printer Using Your Wireless Network

You can connect the printer to your wireless network using the Leitz Icon Add Printer Wizard or using WPS (Wi-Fi
Protected Setup).

Connecting the Printer to your Wireless Network Using WPS

You can quickly connect the printer to your wireless network using WPS.
To connect your printer to your wireless network using WPS, you must use a router with WPS support.
NOTE
1.Press the WPS button located on the back of the printer.
The Wireless status light begins to blink.
2.Within two minutes, press the WPS button on your router.
Refer to the router documentation for instructions on locating the WPS button.
When the printer is connected to your wireless network, the Wireless status light stops blinking and turns solid green.

Connecting the Printer to your Computer Using the Leitz Icon Add Printer Wizard

1.In the Add Printer Wizard, select Wi-Fi, and then click Next.
2.Select Infrastructure, and then click Next.
3.Click Soft AP, and then click Next.
4.From the list of available wi-fi access points, select the printer ID of the Leitz Icon printer you want to connect to your
wireless network, and then click Connect.
The Printer ID is formatted as ICON-xxyyzz and can be found on the label on the bottom of your printer.
If the label on the bottom of your printer does not contain the Printer ID, you can determine the Printer ID using the printer's
NOTE
MAC address. In this case, the Printer ID is formatted as ICON-xxyyzz, where xxyyzz is the last six characters of your
printer's MAC address (found on the label on the bottom of your printer). For example, if your printer's MAC address is
MAC:00:1E:CO:13:13:A5, the Printer ID is ICON-1313A5.
5.Enter your user name and password in the User name and Password boxes.
The default user name and password are as follows.
User name: Admin
Password: password
WPS button
9
Getting Started