Connecting The Printer Using Your Wireless Network; Connecting The Printer To Your Wireless Network; Adding The Printer To Your Computer And Installing The Printer Driver - LEITZ ICON User Manual

Leitz Icon Printer User Guide

Connecting the Printer Using Your Wireless Network

Connecting the printer to your computer using your wireless network is a two-step process.
1.Connect the printer to your wireless network.
2.Add the printer to your computer and install the printer driver.

Connecting the Printer to Your Wireless Network

You can connect the printer to your wireless network using WPS (Wi-Fi Protected Setup) or the Leitz Icon Control Panel.
Connecting the Printer to your Wireless Network Using WPS
You can quickly connect the printer to your wireless network using WPS.
To connect your printer to your wireless network using WPS, you must use a router with WPS support.
NOTE
1.Press the WPS button located on the back of the printer.
The Wireless status light begins to blink.
2.Within two minutes, press the WPS button on your router.
Refer to the router documentation for instructions on locating the WPS button.
When the printer is connected to your wireless network, the Wireless status light stops blinking and turns solid green.
Connecting the Printer to your Wireless Network Using the Leitz Icon Control Panel
The Leitz Icon printer includes a built-in web server. The web server appears in your web browser as the Leitz Icon Control
Panel. If your router does not support WPS or if you have trouble connecting your printer to your wireless network using
WPS, you can use the Leitz Icon Control Panel to connect the printer to your wireless network. For details about connecting
your printer to your wireless network using the Leitz Icon Control Panel, see Connecting the Printer to Your Wireless
Network on page 17.

Adding the Printer to Your Computer and Installing the Printer Driver

After you connect the printer to your wireless network, you must next add the printer to your computer and install the printer
driver.
1.Start System Preferences.
2.Under Hardware, click Print & Scan.
3.Under the printer list, click +, and then click Add Printer or Scanner.
The Add dialog box appears.
4.Click Leitz Icon in the list of available printers.
The Kind column should display Bonjour.
WPS button
11
Getting Started