Table of Contents
Advertisement
Eliminating minor faults yourself
Before you call customer service, please check whether you can eliminate the fault by
yourself based on the following information.
A technician who is called out for consultation purposes will charge the customer, even
if the appliance is still under guarantee.
Fault
Temperature
differs greatly from
the set value.
Displays do not
illuminate.
Alarm display,
Fig. 2/5, comes
on, acoustic
warning signal
sounds.
Downloaded from Fridge-Manual.com Manuals
Possible cause
Power failure!
S The fuse has tripped.
S The mains plug has not been
inserted properly.
Fault
the freezer compartment
is too warm!
S The ventilation openings have
been covered.
S Freezer compartment door is
open.
S Too much food was placed in
the freezer compartment at
once.
When the fault has been
eliminated, the indicator light
goes out shortly afterwards.
Remedial action
In some cases it is adequate to switch off the
appliance for 5 minutes.
If the temperature is too high wait a few hours
and check whether the temperature has
approached the set value.
If the temperature is too low check
the temperature again the next day.
Check whether the power is on, the fuse must
be switched on.
To switch off the warning signal, press the
Alarm button.
Ensure that there is adequate ventilation.
Close the door.
Do not exceed max. freezing capacity.
en
25
Advertisement
Table of Contents
