Oki 1220n User Manual page 110

Note: Factory default settings are shown in bold.
Item
ZERO
CHARACTER
LINE PITCH
WHITE PAGE
SKIP
CR FUNCTION
LF FUNCTION
LINE LENGTH
FORM LENGTH 11 INCH
TOF POSITION 0.0 to 1.0 INCH, in 0.1-inch
LEFT MARGIN
FIT TO LETTER DISABLE
TEXT HEIGHT
PPR Emulation Menu (continued)
Settings
Normal
Slashed
6 LPI
8 LPI
OFF
ON
CR
CR+LF
LF
LF+CR
80 COLUMN
136 COLUMN
11.7 INCH
12 INCH
increments
0.0 to 1.0 INCH, in 0.1-inch
increments
Enable
SAME
DIFF
ES 1220n Menu Functions • 110
Explanation
Sets the zero to be slashed
or unslashed.
Specifies the line spacing
(lines per inch).
Change this setting to ON if
you do not wish to print blank
pages.
Not available for duplex
printing.
Sets functionality on receipt
of CR code.
Sets functionality on receipt
of LF code.
Specifies the number of
characters per line.
Specifies the length of paper.
Specifies the distance of
print from the top edge of the
paper.
Specifies the distance of
print from the left hand edge
of the paper.
Fits print data, equivalent to
11 inches (66 lines), in the
LETTER-size printable area.
Sets the height of a
character. Change to DIFF if
you wish the character
height to vary with the
Character Pitch setting.