Color Menu - Oki 1220n User Manual

The printer automatically adjusts color balance and density
at appropriate intervals, optimizing the printed output for
bright white paper viewed in natural daylight conditions. The
items on this menu provide a means of changing the default
settings for special or particularly difficult print jobs.
Settings revert to their default values when the next print job
is complete.
Note: Factory default settings are shown in bold.
Item
DENSITY
CONTROL
AUTO DENSITY
COLOR TUNING PRINT
NOTE

Color Menu

Settings
AUTO
MANUAL
EXECUTE
PATTERN
ES 1220n Menu Functions • 100
Explanation
AUTO = image density is automatically
adjusted:
• at power on
• when a new image drum or toner
cartridge is installed
• at intervals of 100, 300 and 500 drum
counts
Auto adjustment takes up to 55
seconds.
Switch to manual only if you wish to
initiate Density Control manually using
the printer menu.
Selecting this will perform the auto
density set up.
Prints the pattern for the user to
manually adjust TRC. Ordinarily this
function is not needed because TRC is
automatically adjusted. See "Setting
Color Tuning from The Front Panel" on
page 121.