Oki 1220n User Manual page 101

Note: Factory default settings are shown in bold.
Item
C HIGHLIGHT
C MID-TONE
C DARK
M HIGHLIGHT
M MID-TONE
M DARK
Y HIGHLIGHT
Y MID-TONE
Y DARK
K HIGHLIGHT
K MID-TONE
K DARK
C DARKNESS
M DARKNESS
Y DARKNESS
K DARKNESS
AJST
REGSTRATION
C REG FINE
ADJUST
M REG FINE
ADJUST
Y REG FINE
ADJUST
INK SIMULATION
UCR
Color Menu (continued)
Settings
-3 to + 3 in
increments of 1
0
Default =
-3 to + 3 in
increments of 1
0
Default =
EXECUTE
-3 to + 3 in
increments of 1
0
Default =
OFF
SWOP
EUROSCALE
JAPAN
LOW
MEDIUM
HIGH
ES 1220n Menu Functions • 101
Explanation
Adjusts image density for each color
component (cyan, magenta, yellow and
black). Normal setting is 0.
See "Setting Color Tuning from The
Front Panel" on page 121.
Adjusts darkness of each color
component (cyan, magenta, yellow and
black). Normal setting is 0.
Performs automatic color registration
adjustment. Normally this is done at
power on and when the top cover is
opened and then closed. This process
accurately aligns the cyan, magenta and
yellow images to the black image.
Performs fine adjustment of image
timing in relation to the black image
component.
Selects from a range of industry
standard color swatches.
If paper curl occurs when printing pages
with large areas of black print, changing
this setting may help reduce the curl.