NETGEAR R6900 User Manual page 73

Nighthawk AC1900 Smart WiFi Router Model R6900
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > Access Control.
The previous figure shows two WiFi devices connected.
5. Select the Turn on Access Control check box.
You must select this check box before you can specify an access rule and use the Allow and Block
buttons. When the Turn on Access Control check box is cleared, all devices are allowed to connect,
even if a device is in the list of blocked devices.
6. Click the Apply button.
Your settings are saved.
7. Select an access rule for new devices:
• Allow all new devices to connect. With this setting, if you add a new device, it can access your
network. You do not need to enter its MAC address on this page. We recommend that you leave
this radio button selected.
• Block all new devices from connecting. With this setting, if you add a new device, before it can
access your network, you must enter its MAC address for an Ethernet connection and its MAC
address for a WiFi connection in the allowed list. For more information, see
Control Lists on page 74.
The access rule does not affect previously blocked or allowed devices. It applies only to devices joining
your network in the future after you apply these settings.
8. To manage access for currently connected computers and devices:
Control Access to the Internet
73
Manage Network Access