Sony VGC-V520G Servise Manual page 7

DISASSEMBLY
4
To Flowchart
Acetate tape
Nickel tape
(IDE)
1
1
1
2
1
A
A
B
B
7
TOP FOR SAFETY
P1
P3
P4
P2
Acetate tape
5
Nickel cloth tape
6
(40X70)
1
6
2
Switching
8
power.
Aluminium tape
(50X95)
B
HDD
4
3
A
DISASSEMBLY DISASSEMBLY FRAME HARNESS
Attach the nickel cloth tape (50 x 15)
so that it should not cover any portion of
the hole of the chassis.
Nickel cloth
tape (50 x 15)
Hole of the
chassis
Nickel cloth tape
(30X50) Nickel cloth tape (50 x 15)
Hole of the chassis
Tape attachment positions
Be careful not to
be caught.
Acetate tape
(Note1)
Fix it at the
center of the
power supply block.
Aluminium tape (50X95)
Nickel cloth tape (IDE)
(Note2)
Be careful so that it
Nickel cloth tape (30X50)
should not protrude
into the IDE connector.
– 7 –
EXPLODED VIEW
4
HDD, SWITCHING POWER
1 Peel off the nickel tape
(IDE), nickel cloth tape
(30X50) and acetate tape.
2 Disconnect the two
connectors.
3 Remove the four screws.
4 Peel off the aluminium
tape (50X95) and remove
the HDD.
5 Peel off acetate tape.
6 Disconnect the three
connectors. Peel off the
nickel cloth (40X70).
7 Remove the four screws.
8 Remove the switching
power.
PARTS LIST
Ref. No 166
(SW)(NO.6-32UNC)
4-645-944-22
Silver
Ref. No 165
+K ( # 6-32UNC 1/4)
2-050-805-01
Black