Page 2
Also check Sony, VAIO and CLIE are trademarks or regis- the area around the repair location to ensure that tered trademarks of Sony. Microsoft, Windows, Labels and stamps on the cabinet, chassis, and...
Page 3
SHIELD ASSY MEMORY DVD-2 11 SUB CHASSIS ASSY DC FAN, CPU WIRELESS LAN CARD 16 FRONT SECTION 12 ENX-30, CNX-266 MOTHER BOARD VGC-V520G/V617G/V620G LCD SECTION INVERTER UNIT 17 CNX-264, SWX-174, LCD SECTION INVERTER UNIT 18 CNX-264, SWX-174, RAY-CATCHER RAY-CATCHER SPEAKER UNIT...
Page 4
FOR SAFETY DISASSEMBLY DISASSEMBLY FRAME HARNESS EXPLODED VIEW PARTS LIST DISASSEMBLY SLIDE COVER ASSY 1 Move, by sliding, the slide cover assy upward Slide cover assy until the connectors on the rear of the set is exposed. 2 While pushing the portion To Flowchart (A), move, by sliding, the slide cover assy further...
Page 5
FOR SAFETY DISASSEMBLY DISASSEMBLY FRAME HARNESS EXPLODED VIEW PARTS LIST DISASSEMBLY MEMORY 1 Remove the two screws. Memory cover Memory (*1) Ref. No 167 +PS (3 X 6) Clip 4-679-053-01 Silver To Flowchart 2 Disengage the three detents and remove the memory cover.
Page 6
FOR SAFETY DISASSEMBLY DISASSEMBLY FRAME HARNESS EXPLODED VIEW PARTS LIST DISASSEMBLY STAND COVER ASSY 1 Remove the two screws. Ref. No 172 FLAT HEAD 4-672-839-11 Black To Flowchart 2 Disengage the six detents and remove the stand Nickel tape (PS top) cover assy.
Page 7
FOR SAFETY DISASSEMBLY DISASSEMBLY FRAME HARNESS EXPLODED VIEW PARTS LIST DISASSEMBLY HDD, SWITCHING POWER 1 Peel off the nickel tape Attach the nickel cloth tape (50 x 15) (IDE), nickel cloth tape so that it should not cover any portion of (30X50) and acetate tape.
FOR SAFETY DISASSEMBLY DISASSEMBLY FRAME HARNESS EXPLODED VIEW PARTS LIST DISASSEMBLY STAND ASSY 1 Remove the four screws. Stand assy Ref. No 157 +PS (3 X 8) 2-067-022-01 Black To Flowchart 2 Disengage the four detents and the projection part and remove the stand assy.
Page 9
FOR SAFETY DISASSEMBLY DISASSEMBLY FRAME HARNESS EXPLODED VIEW PARTS LIST DISASSEMBLY DVD-1, RIGHT COVER 1 Remove the three screws. Ref. No 170 +B (3X4) 2-067-023-01 Black To Flowchart 2 Move, by sliding, the DVD, Detents optical bracket in the direction shown by the arrow, and remove the DVD, optical bracket Detents...
Page 10
FOR SAFETY DISASSEMBLY DISASSEMBLY FRAME HARNESS EXPLODED VIEW PARTS LIST DISASSEMBLY DVD-2 Pa type Tape attachment 1 Remove positions the two Ref. No 267 Nickel tape screws,and +P PT 1.7x04 (7X11) remove the 2-345-480-01 escutcheon. Black To Flowchart So type Nickel tape 1 Disengage the four (7X11)
Page 11
FOR SAFETY DISASSEMBLY DISASSEMBLY FRAME HARNESS EXPLODED VIEW PARTS LIST DISASSEMBLY REAR COVER ASSY, SWX-184, ANNTENA (RF), RECEIVER (RF) 1 Remove the (*1) (*3) seven screws. SWX-184 board Ref. No 170 +B 3X4 Antenna 2-067-023-01 (RF) Black bracket Detents To Flowchart 2 Disengage the total 20 detents.
FOR SAFETY DISASSEMBLY DISASSEMBLY FRAME HARNESS EXPLODED VIEW PARTS LIST SHIELD ASSY DISASSEMBLY 1 Peel off the four nickel Tape attachment tape (50X15), nickel tape positions (*3) (*1) (*2) (PS top) and the two nickel cloth tape (40X70). Shield Detents (hinge) Nickel cloth tape 2 Remove the Plug of...
Page 13
FOR SAFETY DISASSEMBLY DISASSEMBLY FRAME HARNESS EXPLODED VIEW PARTS LIST DISASSEMBLY CNX-263, IFX-341 CNR MODEM 1 Remove the wire press Tape attachment positions, routing the cables clamp and peel off the aluminium tape (50X70) Disconnect the three Aluminium tape connector. (50X70) Cross the cable ( To Flowchart...
Page 14
FOR SAFETY DISASSEMBLY DISASSEMBLY FRAME HARNESS EXPLODED VIEW PARTS LIST DISASSEMBLY !¡ SUB CHASSIS ASSY 1 Remove the two screws and remove the PC card PC card panel panel. Ref. No 167 +PS (3 X 6) To Flowchart 4-679-053-01 Silver 2 Disconnect the connector.
Page 15
FOR SAFETY DISASSEMBLY DISASSEMBLY FRAME HARNESS EXPLODED VIEW PARTS LIST DISASSEMBLY !™ ENX-30, CNX-266 1 Remove the four screws. Ref. No 167 +PS (3 X 6) 4-679-053-01 Silver Gasket (AY) To Flowchart 2 Remove the harness from the notch. Remove, by ENX-30 board sliding, the ENX-30 board and CNX-266 board.
Page 16
FOR SAFETY DISASSEMBLY DISASSEMBLY FRAME HARNESS EXPLODED VIEW PARTS LIST DISASSEMBLY !£ DC FAN, CPU 1 Peel off the acetate tape. To replace the CPU or heat sink (in case that CPU is equipped with heat sink), install new CPU or heat sink 2 Disconnect the two after thermal dissipation grease is wiped off and connectors.
Page 17
FOR SAFETY DISASSEMBLY DISASSEMBLY FRAME HARNESS EXPLODED VIEW PARTS LIST DISASSEMBLY !¢ MOTHER BOARD 1 Remove the two film When assembling, press When assembling, Route the harness (1) the UL tape with finger in antennas and cables (*1) in the shown the pictures. (*1) the way of tracing the UL Bind the...
Page 18
FOR SAFETY DISASSEMBLY DISASSEMBLY FRAME HARNESS EXPLODED VIEW PARTS LIST DISASSEMBLY WIRELESS LAN CARD (VGC-V520G/V617G/V620G) 1 Open the two detents of Wireless LAN card the socket gently toward outside. Detent 2 Raise the W-LAN card. To Flowchart 3 Pull the W-LAN card in an upward angle.
FOR SAFETY DISASSEMBLY DISASSEMBLY FRAME HARNESS EXPLODED VIEW PARTS LIST DISASSEMBLY !§ FRONT SECTION 1 Disengage the two detents (*4) and remove the center cover. (*1) 2 Remove the cable from the wire saddle. To Flowchart Wire saddle 3 Remove the screws (*1) and disengage the detents (*2)
Page 20
FOR SAFETY DISASSEMBLY DISASSEMBLY FRAME HARNESS EXPLODED VIEW PARTS LIST DISASSEMBLY !¶ CNX-264, SWX-174, RAY-CATCHER (VGC-V520G/V620G) 1 Peel off the aluminium Tape attachment Route the flexible tape (60X25) and positions board as shown. disconnect the connector, and remove the three screws.
Page 21
FOR SAFETY DISASSEMBLY DISASSEMBLY FRAME HARNESS EXPLODED VIEW PARTS LIST DISASSEMBLY !• CNX-264, SWX-174, RAY-CATCHER (VGC-V517G/V617G) 1 Peel off the aluminum Tape attachment Route the two flexible tape (60X25) and positions board through the disconnect the connector,and notch as shown. remove the three screws.
Page 22
FOR SAFETY DISASSEMBLY DISASSEMBLY FRAME HARNESS EXPLODED VIEW PARTS LIST DISASSEMBLY !ª LCD SECTION (VGC-V520G/V620G) 1 Remove the two screws. Ref. No 163 POSITIONING SCREW M4 2-067-017-01 Silver To Flowchart LCD section 2 Remove the two screws. Ref. No 158...
Page 23
FOR SAFETY DISASSEMBLY DISASSEMBLY FRAME HARNESS EXPLODED VIEW PARTS LIST DISASSEMBLY @º LCD SECTION (VGC-V517G/V617G) 1 Peel off the aluminium tape (50X105). 2 Remove the six screws. LCD section To Flowchart Ref. No 167 +PS (3 X 6) 4-679-053-01 Silver 3 While removing the two harnesses through the hole of the chassis, remove the...
Page 24
FOR SAFETY DISASSEMBLY DISASSEMBLY FRAME HARNESS EXPLODED VIEW PARTS LIST DISASSEMBLY @¡ INVERTER UNIT (VGC-V520G/V620G) 1 Remove the three screws and remove the shield UL tape Shield (inverter) (inverter). Shield Ref. No 167 +PS (3 X 6) To Flowchart 4-679-053-01...
Page 25
FOR SAFETY DISASSEMBLY DISASSEMBLY FRAME HARNESS EXPLODED VIEW PARTS LIST DISASSEMBLY @™ INVERTER UNIT (VGC-V517G/V617G) 1 Remove the two screws and the remove the LCD bracket (L). Ref. No 167 +PS (3 X 6) LCD bracket (R) 4-679-053-01 To Flowchart LCD bracket (L) Silver 2 Remove the two screws,...
Page 26
FRAME HARNESS EXPLODED VIEW PARTS LIST DISASSEMBLY @£ SPEAKER UNIT (VGC-V520G/V620G) 1 Peel off the nickel cloth Fix the harness at the two positions as tape (15X40) from the shown using the nickel cloth tape (IDE) harness of the speaker unit (15 x 40) and the two harness clips.
Page 27
FOR SAFETY DISASSEMBLY DISASSEMBLY FRAME HARNESS EXPLODED VIEW PARTS LIST DISASSEMBLY @¢ SPEAKER UNIT (VGC-V517G/V617G) 1 Disconnect the three Fix the harness at the two positions as connectors. shown using the nickel cloth tape (IDE) (15 x 40) and the two harness clips. 2 Remove the screw and Then route the harness through the hole of the chassis.
Page 28
AC INPUT 100V-120V WHITE HARNES (IDE HDD) MOTHER BOARD WHITE UNIT UNIT LVDS1 INV CON1 POWER SPK-R1 SPK-L1 INVERTER UNIT (VGC-V517G/V617G) AUX1 (VGC-V520G/V617G/V620G) CMOSCLEAR (VGC-V520G/ INVERTER FFC (LED/SWITCH SWX-174) V620G) SWX-174 FILM IDE2 UNIT Gray SWX-174 ANTENNA (VGC-V520G/V620G) BOARD FAN1...
FOR SAFETY DISASSEMBLY FRAME HARNESS EXPLODED VIEW EXPLODED VIEW PARTS LIST EXPLODED VIEW REAR UNIT (VGC-V520G/V620G) Main unit (V520G) (V620G) (NOTE1) (NOTE1) : Refer to page 39. – 29 –...
Page 30
FOR SAFETY DISASSEMBLY FRAME HARNESS EXPLODED VIEW EXPLODED VIEW PARTS LIST EXPLODED VIEW REAR UNIT (VGC-V517G/V617G) Main unit (V517G) (V617G) (NOTE1) (V617G) (V617G) (NOTE1) : Refer to page 39. – 30 –...
Page 31
FOR SAFETY DISASSEMBLY FRAME HARNESS EXPLODED VIEW EXPLODED VIEW PARTS LIST EXPLODED VIEW MAIN UNIT (VGC-V520G/V620G) Front unit (Pa Type) (NOTE2) (So Type) 167 101 (V520G) (NOTE2) (NOTE2) : Refer to page 39. – 31 –...
Page 32
FOR SAFETY DISASSEMBLY FRAME HARNESS EXPLODED VIEW EXPLODED VIEW PARTS LIST EXPLODED VIEW MAIN UNIT (VGC-V517G/V617G) (Pa Type) (V617G) (V617G) (NOTE2) Front unit (So Type) (V617G) (V617G) (V617G) (V617G) (V517G) (NOTE2) 167 222 (NOTE2) : Refer to page 39. – 32 –...
Page 33
FOR SAFETY DISASSEMBLY FRAME HARNESS EXPLODED VIEW EXPLODED VIEW PARTS LIST EXPLODED VIEW FRONT UNIT (VGC-V520G/V620G) (NOTE3) (NOTE3) : Refer to page 40. – 33 –...
Page 34
FOR SAFETY DISASSEMBLY FRAME HARNESS EXPLODED VIEW EXPLODED VIEW PARTS LIST EXPLODED VIEW FRONT UNIT (VGC-V517G/V617G) (V617G) (V617G) (V517G) (NOTE3) (V617G) (V617G) (NOTE3) : Refer to page 40. – 34 –...
Page 35
FOR SAFETY DISASSEMBLY FRAME HARNESS EXPLODED VIEW EXPLODED VIEW PARTS LIST EXPLODED VIEW ACCESSORIES KEY BOARD REMOTE COMMANDER CONNECTION CORD (RK-G129) (RM-VC10U) AC CORD VIDEO ADAPTER CABLE CONNECTION CORD (F TYPE RF) MOUSE – 35 –...
FOR SAFETY DISASSEMBLY FRAME HARNESS EXPLODED VIEW PARTS LIST PARTS LIST PARTS LIST Basic List 2005 Spring 2005 Summer Ref No Part No Description V520G V517G V620G V617G Note NOTE : 1-789-042-24 MOTHER BOARD (DI/H) Note2:Refer to page 39. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- 1-789-042-42 MOTHER BOARD (DI/H) Note2:Refer to page 39.
Page 37
FOR SAFETY DISASSEMBLY FRAME HARNESS EXPLODED VIEW PARTS LIST PARTS LIST 2005 Spring 2005 Summer 2005 Spring 2005 Summer Ref No Part No Description V520G V517G V620G V617G Note Ref No Part No Description V520G V517G V620G V617G Note 1-478-726-21 RAY-CATCHER UNIT 7-627-853-07 PRECISION SCREW +P 2X2 TYPE 3...
FOR SAFETY DISASSEMBLY FRAME HARNESS EXPLODED VIEW PARTS LIST PARTS LIST Accessories & Packing Materials List 2005 Spring 2005 Summer Ref No Part No Description V520G V517G V620G V617G Note 2-345-480-01 +P PT 1.7X04 CM3 2005 Spring 2005 Summer 2-580-080-01 LABEL, MODEL NUMBER ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Ref No...
Page 39
FOR SAFETY DISASSEMBLY FRAME HARNESS EXPLODED VIEW PARTS LIST PARTS LIST (NOTE1) • Parts to be used differ depending on the power supply used. Be careful to use appropriate parts. 1-468-853-13 1-468-900-11,-12 POWER, SWITCHING (295W) POWER, SWITCHING (218W) SHIELD ASSY, PS X-2022-907-1 (Ref.No.173) TAPE, PS SHIELD...
Page 40
FOR SAFETY DISASSEMBLY FRAME HARNESS EXPLODED VIEW PARTS LIST PARTS LIST (NOTE3) • The tape to fasten the LCD harness differs depending on the suffix of the harness. Be careful to use the appropriate tape. 1-962-809-11,-12 1-962-809-13 1-963-810-11,-12 1-962-810-11,-12 1-962-810-13 or later TAPE (50X15), NICKEL 2-176-599-01 (Ref.No.207)