Sony VGC-V520G Servise Manual page 13

DISASSEMBLY
10
To Flowchart
IFX-341 board
2 4
3 2
CNX-263 board Aluminium tape (50X70)
TOP FOR SAFETY
Tape attachment positions, routing the cables
Aluminium tape
(50X70)
Cross the cable (
Wire press clamp
Be careful that the harness
should not be located 3 mm
or more away from
the Mother Board.
1 3
1
Wire press clamp
DISASSEMBLY DISASSEMBLY FRAME HARNESS
0
CNX-263, IFX-341 CNR MODEM
)
1
Route the harness (
in between the IDE
connector and capacitor.
3 3
3 3
CNR modem
– 13 –
EXPLODED VIEW
1 Remove the wire press
clamp and peel off the
aluminium tape (50X70)
Disconnect the three
connector.
)
1
2 Remove the
two screws
and remove
the CNX-263
board.
3 Remove the screw and
disconnect the connector,
then remove the CNR
modem.
4 Remove the two screws and
disconnect the connector,
then remove the IFX-341
board.
PARTS LIST
Ref. No 167
+PS (3 X 6)
4-679-053-01
Silver
Ref. No 167
+PS (3 X 6)
4-679-053-01
Silver
Ref. No 151
+B (2 X 3)
2-108-226-01
Black