Sony VGC-V520G Servise Manual page 26

DISASSEMBLY
23
To Flowchart
Notes on installing the LCD stopper
Position: 5 mm away from the opening
of the fan.
Install it so that about one third of
the LCD stopper protrudes from
the LCD fan housing.
LCD stopper
LCD
fan housing
Notes on installing the speaker unit
• Check that any part of the speaker
does not ride over the harness.
• Push the harness against the speaker
after installing the speaker.
TOP FOR SAFETY
Nickel cloth tape
(15X40)
1 3
2
Speaker unit
DISASSEMBLY DISASSEMBLY FRAME HARNESS
@£
SPEAKER UNIT (VGC-V520G/V620G)
Fix the harness at the two positions as
shown using the nickel cloth tape (IDE)
(15 x 40) and the two harness clips.
Then route the harness through the
hole of the chassis.
Harness clips
1 3
2
– 26 –
EXPLODED VIEW PARTS LIST
1 Peel off the nickel cloth
tape (15X40) from the
harness of the speaker unit
and remove it from the two
harness clip.
2 Remove the four screws
and remove the speaker
unit.
Ref. No 167
+PS (3 X 6)
4-679-053-01
Silver