Table of Contents
Advertisement
3 Change the setting:
Windows 2000 and NT 4.0:
a Click the Device Settings tab.
b Scroll down to Installable Options and
click Hard Disk.
c Under Change 'Hard Disk' Setting, click
Installed.
Windows Me, 98 and 95:
a Click the Device Options tab.
b Click Hard Disk.
c Under Change setting for: Hard Disk,
click Installed.
4 Click OK, then close the Printers dialog box.
Macintosh
1 Activate Chooser from the Apple menu.
2 Select LaserWriter 8.
3 Click Printer
4 Click Configure.
5 Change the Hard Disk setting to Installed.
6 Click OK twice, then close Chooser.
®
Driver
Setup.
®
11
Advertisement
Table of Contents
