Installation Procedures - Canon PIXMA IP4200 Installation Instruction

3. Installation Procedures:

1) First step
Put the CIS at the right side of printer
And make sure the tube line does not
twist.
2) Install chips
Carefully remove the original chips
from original cartridges as the picture
shows.
Put some glue on the chip position of
CISS cartridge.
3) Install cartridges
Attache the support arm on the proper
position as the picture shown above.
Take off the rubbers from ink tank's
Air-hole
Pay attention when you remove original
chips. Make sure that the chips are not
damaged.
Then stick original chips according to
color of cartridges. Please make sure
that the chips number matches
cartridge number.
Then put the CISS cartridges into printer Please make sure that every cartridge is
Put the Air-filter into the Air-hole
Finished.
Do the same for the other cartridges.
well installed according to the color label.