Change Echo Settings - JBL KX200 Quick Start Manual

07 - Change ECHO Settings

STEPS:
1. Click Echo menu button to enter the
interface for echo settings.
2. Select target EQ filter in the EQ Filter
Select.
3. Set each parameter to desired level.
4. Click Store to save the settings as
Preset.
NOTE:
1.
Pre-Delay creates an additional time delay
between the source signal and the onset of rever-
beration. Pre-delay R is set to a percentage of
Pre-delay L and can widen the stereo image of
the delay.
2.
Delay Time sets the time length between
repeated signals. ECHO R is set to a percentage
of ECHO L and can create a spatial sense of the
stereo.
3.
ECHO Level controls the master volume of echo
effect and can be muted (MUTE) while else effect
is to be monitored.
13