Table of Contents
Summary of Contents for Danguard HS-200
- Page 1 User manual HS-200 / HS-210 / HS-400 / HS-410 Stand: 2.1 Januar 2015 // Technische Änderungen, Druckfehler und Irrtümer vorbehalten. Megasat Werke GmbH | Industriestraße 4a | D-97618 Niederlauer | www.megasat.tv | info@megasat.tv...
-
Page 2: Table Of Contents
Content 1. General Information 1. General Information 1.1 Introduction 1.1 Introduction ..............03 1.2 Features ................03 1.3 Delivery .................03 This product is a wireless surveillance system with recording function. It consists of two, three, or four cameras and a 7“ TFT LCD monitor. The display is four split-screen can display the monitoring 2. - Page 3 4. Operation 4. Operation 1. Connect the camera to the power supply. The power Indicator on the back is turned on. 5. After successful pairing, the following real-time monitoring picture appears: Picture display area Picture display area Time stamp 2013/11/15/09:30 2013/11/15/09:30 Picture display area Picture display area...
- Page 4 5. Main Menu 5. Main Menu Network: 5.1 System Press the p or q button to select the menu item NETWORK. Confirm with OK. Press in the real-time monitoring the MENU but- ton to enter the main menu. Press the t or u button to select the menu Note: item SYSTEM.
-
Page 5: Designations
2. Designations 3. Installation 1. Install the camera at the proper monitoring location and screw up the bracket. Antenna Antenna jack Pairing Infrared LEDs button Power supply Lens PIR Infrared Installieren Sie die Kamera sensor auf einer ebenen Fläche. Microphon Bracket Link indicator Power Indicator... -
Page 6: Network (Only At Ip Version)
5. Main Menu 5. Main Menu Language: Storage for Recording Press the p or q button to select the menu item LANGUAGE. Confirm with OK. Press the p or q button to select the menu item STORAGE FOR RECORDING. Confirm with OK. You can choose between two options: The following languages are available: German, English, Dutch, French, Portuguese, Italian, Spa- SD-Card:... -
Page 7: System Upgrade
5. Main Menu 5. Main Menu System Upgrade Volume Press the p or q button to select the menu item SYSTEM UPGRADE. In this menu, you can Press the p or q button to select the menu item „VOLUME“. In this menu you can adjust the update the firmware of the monitor, or the cameras. -
Page 8: Record
5. Main Menu 5. Main Menu Motion Detection 5.2 Record Press the p or q button to select the menu Note: item „Motion Detection“. In this menu, you can Press in the real-time monitoring the MENU but- specify that a camera automatically records ton to enter the main menu. -
Page 9: Pir Recording
5. Main Menu 5. Main Menu PIR Recording 5.3 Playback Press the p or q button to select the menu Hinweis: item „PIR Recording“. In this menu, you can Press in the real-time monitoring the MENU button to enter the main menu. specify that a camera automatically records vi- Die Erkennung einer Wärmequelle reagiert deo when it perceives a heat source. -
Page 10: Camera
5. Main Menu 5. Main Menu Activation 5.4 Camera Press the p or q button to select the menu item „Activation“. Now use the p or q button Press in the real-time monitoring the MENU but- to select a camera which you want to activate. ton to enter the main menu. -
Page 11: Alarm
5. Main Menu 6. Operating with Android devices Connect to the network 5.5 Alarm Note: Insert the receiver in the pedestal, and connect The network features with Android de- with the base power. Then connect the outer Press in the real-time monitoring the MENU button to enter the main menu. vices is only in available at the IP version net. - Page 12 6. Operating with Android devices 6. Operating with Android devices 1. Go into the settings and add there a new camera. 3. Click the play icon, the image will display on the smart phone. 2. When the monitor and mobile phone can normally connect to outer net. You just need to input 4.
-
Page 13: Setting The Push Notification
6. Operating with Android devices 7. Operating with iOS devices Setting the Push Notification Connect to the network Note: Go to the Main Menu -> System -> Network Insert the receiver in the pedestal, and connect The network features with iOS devices is ->... - Page 14 7. Operating with iOS devices 7. Operating with iOS devices 1. Click the APP and enter “Device list” interface. Click the „plus“ icon to add new camera. 3. To view the video image, you need to choose the right title in the Device list, then click the line to enter the monitoring mode.
-
Page 15: Setting The Push Notification
7. Operating with iOS devices 8. Specifications Setting the Push Notification Camera Imaging Sensor ........1/5 inch Color CMOS Go to the Main Menu -> System -> Network Video resolution ........656 x 488 -> Push notification. in the menu item „Enab- Viewing angle .........50 °... -
Page 16: Troubleshooting
9. Troubleshooting Declaration of Conformity This attesting conformity with the following directives / standards: Problems Solutions No display Confirm the adapters of receiver and camera connect OK Electromagnetic Compatibility Directive 2004/108 / EC Failure in USB connection. Confirm the USB plug connects OK EN 55013: 2001 + A1: 2003 + A2: 2006 EN 55020: 2007 Failure in setting, see more details in the manual. - Page 17 Status: 2.1 January 2015 // Technical changes, misprint and errors reserved. Megasat Werke GmbH | Industriestraße 4a | D-97618 Niederlauer | www.megasat.tv | info@megasat.tv...