Safety Advice; Safety Instructions - Prep/Master PM200 Operating Manual

2.0 Safety Instructions

2.1 Explanation of Warnings and Symbols
2.2 Organizational Measures
2.3 Personnel Selection and Qualification
2.4 Safety Precautions Applicable to Different Operating Conditions
2.5 Repair Work, Maintenance Activities, and Default Repair on the Job Site
2.6 Definition of the Safety-off Position
2.7 Dangerous Aspects of the Machine
2.8 Electrical Engineering Regulations
2.9 Special Instructions
The following safety instructions must be followed as shown
here. Failure to do so may result in hazard to health or possible
death.
2.1 Explanation of Warnings and Symbols
The following symbols are used in the operating instructions to highlight areas
of particular importance:
Operational Safety
This symbol will be shown in these Operating Instructions next to all safety
precautions that are to be taken in order to ensure prevention of injury. Follow
these instructions and take special care in these circumstances. In addition to
these instructions, the general safety precautions and the local accident prevention
guidelines are also to be followed. Please check, whether there are special
regulations for the particular job site.
Safety Goggles/ Ear Protection
Information, instructions, and restrictions with regards to possible risks to persons
or extensive material damages.
Electrical Warning
Warning against dangerous voltages.
Operating Manual PM200
3