Prep/Master PM200 Operating Manual page 10

PM200 Operating Manual
2.6 Definition of the Safety-off Position
Definition:
The safety off position is the position of the machine when it cannot generate any hazard.
Putting the machine in the safety-off position means:
• Switch off the grinder.
• Switch off the dust collector.
• Wait for standstill of all drives.
• Pull out main plugs.
• Secure the machine against unintended start up.
2.7 Dangerous Aspects of the Machine
Every machine, if it is not used according to the regulations, may be hazardous
for operating, setting-up and service personnel. The operating authority is
responsible for compliance with the safety regulations during operation and
maintenance of safety devices supplied with the machine as well as the
provision of appropriate additional safety devices.
The electrical parts of the machine must be inspected regularly. Please note
in particular, the specified recurring inspections according BGV A3 or local
regulations. Defects such as loose connections or scorched cables must be
rectified immediately. Call a skilled electrician or the IMPACTS customer service.
8
The PM200 is designed with removable RH and LH side
guards (A).This allows the operator to work along walls
when these guards are taken off.
• 2-inch Dust Hose
• Tool to remove the blade guards
• Handle adjustment
Only if necessary or exclusively, work along wall
surfaces with Side Box taken off; however, remount the
Side Box immediately after completion of the project.