Table of Contents
Advertisement
U T I L I T Y
INTEGRATED TRAILER BRAKE MODULE
The Integrated Trailer Brake Controller allows you to automatically or manually
activate the Electric Trailer Brakes and Electric Over Hydraulic Trailer Brakes for a
better braking performance when towing a trailer.
NOTE:
The Integrated Trailer Brake Controller is located in the center stack below the
climate controls.
This module will have four different options depending on the type of trailer you want
to tow and can be selected through the 3.5" Electronic Vehicle Information Center
(EVIC) or touchscreen radio.
• Light Electric
• Heavy Electric
• Light EOH (Electric Over Hydraulic)
• Heavy EOH (Electric Over Hydraulic)
Setting With Uconnect® Touchscreen Radio
To make the proper selection in the Uconnect
button on the faceplate (Uconnect
(Uconnect
8.4), then press the Settings button on the touchscreen to display the
®
menu setting screen and press trailer brake. For additional information, refer to your
Owner's Manual on the DVD.
Setting With 3.5" EVIC
1. Press the RIGHT arrow on the steering wheel to enter "VEHICLE SETTINGS."
2. Press the UP or DOWN buttons until Trailer Brake Type appears on the screen.
3. Press the RIGHT arrow and then press the UP or DOWN buttons until the proper
Trailer Brake Type appears on the screen. For additional information, refer to your
Owner's Manual on the DVD.
170
touchscreen radio, push the More
®
®
5.0) or press the Apps button on the touchscreen
Advertisement
Table of Contents
