Handset Screening; Setting The Outgoing Message Language - BELGACOM Twist 619 User Manual

answering machine will drop the
line immediately.
• If the remote access code is
correct, a short validation tone
will be heard.
Note
Operation is cancelled if the PIN code is
not entered within 8 seconds.
If the answering machine is off, the phone
will enter into the remote access mode
after 10 rings. A beep will then sound,
prompting you to enter the PIN code.
Enter the PIN (default is 0000) to
activate the remote access feature. You
can then turn ON the answering machine
and play the recorded messages.
The following table indicates how to
access the functions of the answering
machine using the telephone keypad.
Key Action
1 Go to previous message.
2 Play the message.
3 Skip to the next message.
6 Delete the playing message.
7 Turn on the answering
machine.
8 Stop message playback.
9 Turn off the answering
machine.

10.6.3 Handset Screening

When Handset call screening is set to
On, you can press o Screen to start
call screening for incoming messages. If
you decide to pick up the call, press t.
Telephone answering machine (TAM)
Once you pick up, the recording will stop
automatically.
Note
If you have multiple handsets, only one
handset can enable handset call screening
for each call.
Press the m key in idle mode,
1
scroll n to Answer Machine, and
press o Select.
2 Scroll n to Settings and press
o Select. Then, scroll n to HS
Screening and press o Select.
Scroll n to select On or Off and
3
press o Select.
• A validation tone is emitted and
the screen returns to Settings
menu.
10.6.4 Setting the Outgoing
Message Language
1 Press the m key in idle mode,
scroll n to Answer Machine, and
press o Select.
2 Scroll n to Settings and press
o Select. Then, scroll n to
Voice Language and press o
Select.
Scroll n to select the language and
3
press o Select.
• A validation tone is emitted and
the screen returns to Settings
menu.
57