WARNING!
Never alter the gas pressure. Special purpose
charging equipment and access to nitrogen is
required. The gas pressure should normally never
be altered.
WARNING!
The shock absorber is provided with a separate
type reservoir filled with high pressure nitrogen
gas. To prevent danger of explosion, study and
make certain that you fully understand the fol-
lowing information before handling the shock ab-
sorber. The manufacturer cannot be held respon-
sible for damage to property or personal injury
that may result from improper handling.
1. Never tamper with or attempt to disassem-
ble the cylinder or the reservoir.
2. Never expose the shock absorber to an open
flame or other excessive heat. The shock ab-
sorber may othervise explode due to too high
pressure.
3. Be careful not to damage any part of the gas
reservoir. A damaged gas reservoir will impair the
damping performance or cause malfunction.
4. Take care not to scratch the contact surface
of the piston rod of the cylinder,oil could other-
wise leak out.
5. Never attempt to remove the plug at the bot-
tom of the nitrogen gas reservoir. Any attempt
to remove the plug implies serious danger.
6. When scrapping the shock absorber, follow
the instructions for disposal.
11