Pioneer CDJ-400 Connection Manual page 5

Using Compact Disc Players as
TRAKTOR Series Audio Output Devices
Set up the computer and TRAKTOR series in accordance with the following procedures.
When Using Windows
1
Install the [Pioneer_CDJ_Driver] driver software into the computer.
Download [Pioneer_CDJ_Driver] from the following website.
http://pioneer.jp/support/download/index-e.html
2
Select [Pioneer CDJ ASIO] with the [File] → [Audio Setup] function on the TRAKTOR series.
3
The Compact Disc Player will be automatically set up at the audio output device.
If the settings are not made automatically, set the necessary parameters manually with [File] →
[Audio Setup] → [Output Routing].
*Only 32-bit applications can be used with the driver software if a 64-bit operating system is in operation.
When Using Mac OS
It is not necessary to install the driver software.
Set up the computer parameters in accordance with the following procedures if multiple Compact Disc Players are
to be used as audio output devices.
■ When Using the Mac OS X 10.5.X
1
Connect the Compact Disc Player (or players, if more than one are to be connected) to the computer with
the use of a USB cable.
2
Start up [AUDIO MIDI Settings] from the [Applications]–[Utilities] folder.
3
Select [Device Set Editor] from the [Audio] menu.
4
Click [+] on the [Device Set Editor] screen to add the new Device settings.
5
Select the added Device setting, and then add [CDJ-400] to it for the required number of Compact Disc
Players.
6
Select the Device setting created with procedure
7
The Compact Disc Player will be automatically set up at the audio output device.
If the settings are not made automatically, set the necessary parameters manually with [File] →
[Audio Setup] → [Output Routing].
®
(supported OS*: Windows 7, Windows Vista
5
5
with [File] → [Audio Setup] on the TRAKTOR series.
®
, Windows XP)