Usim Pins - SoftBank 820P User Manual

1

USIM PINs

There are two USIM Card security codes:
PIN1
4 to 8-digit code used to prevent unauthorized 820P use.
! PIN1 can be changed (ZP.10-3).
! When PIN Entry is
ON
each time 820P is turned on (with USIM Card inserted).
When PIN Entry is
! Signal Indicator may take some time to appear in
Standby after entering PIN1.
! Enter PIN1 to dial emergency numbers (110, 119, 118).
PIN2
Required to clear All Calls or set Cost Limit and Currency
Setting (ZP.16-9).
! PIN2 can be changed (ZP.10-3).
1-4
&
PIN1 PIN2
<Default> 9999
(ZP.10-2), PIN1 entry is required
Z
( P.10-2):
ON
<Default> 9999
PIN Lock & Cancellation (PUK)
PIN1 Lock or PIN2 Lock is activated if PIN1 or PIN2 is
.
incorrectly entered three times. Cancel PIN1 Lock or PIN2 Lock
by entering the PIN Unblocking Key (PUK/PUK2) (ZP.10-3).
! For information on PUK, contact SoftBank Customer Center,
General Information (ZP.17-40).
! If PUK is incorrectly entered ten times, USIM Card is
locked and handset is disabled. Write down PUK.
! For procedures required to unlock USIM Card, contact
SoftBank Customer Center, General Information
(ZP.17-40).