DeLonghi ECAM65X.55 Instructions For Use Manual page 29

Coffee does not come out of one or
both of the spouts.
The appliance does not come on
The infuser cannot be extracted
At the end of descaling, the appliance
requests a third rinse
The milk does not come out of the
milk spout (D5)
The milk contains large bubbles and
squirts out of the milk spout (D5) or
there is little froth
The coffee spouts (A8) are blocked.
The power cord (C8) connector is not
inserted correctly.
It is not plugged into the mains socket. Plug into the mains socket (fig. 1).
The main switch (A21) is not turned on. Press the main switch (fig. 2).
The appliance has not been turned off
correctly
During the two rinse cycles, the water
tank has not been filled to the MAX
level
The lid (D2) of the milk container lid
(D) is dirty
The milk is not cold enough or is not
semi-skimmed.
The froth adjustment dial (D1) is incor-
rectly adjusted.
The milk container lid (D2) or froth
adjustment dial (D1) are dirty
The hot water/steam connection noz-
zle (A9) is dirty
29
Clean the spouts with a toothpick (fig. 36B).
Insert the connector as far as it will go in the
socket at the back of the appliance (fig. 1).
Turn the appliance off by pressing the
ton (A7) (section "7. Turning the appliance off").
Follow the instructions displayed by the ap-
pliance, but first empty the drip tray to avoid the
water overflowing.
Clean the milk container lid as described in sec-
tion "15.10 Cleaning the milk container".
Use skimmed or semi-skimmed milk at refrige-
rator temperature (about 5° C). If the result is
not as you wished, try changing brand of milk.
Adjust following the instructions in section
"10. Making cappuccinos and milk-based
coffees".
Clean the milk container lid and control knob
as described in section "15.10 Cleaning the
milk container".
Clean the connection nozzle as described in
section "15.11 Cleaning the hot water/steam
connection nozzle".
but-