DeLonghi ECAM65X.55 Instructions For Use Manual page 27

TURN MILK FROTH
ADJUSTMENT DIAL TO CLEAN
POSITION
CLEAN
ESC
TURN THE MILK FROTH
ADJUSTMENT DIAL
DESCALING NEEDED PRESS
OK TO START (~40MIN)
ESC OK
REPLACE WATER SOFTENER
FILTER PRESS OK TO START
ESC OK
GENERIC ALARM. REFER TO
USER MANUAL / APP
Milk has been delivered recently and the tubes
inside the milk container (D) must be cleaned.
The milk container has been inserted with
the froth adjustment dial (D1) in the "CLEAN"
position.
The machine must be descaled.
The water softener filter (C4) is exhausted.
The inside of the appliance is very dirty.
The appliance needs descaling and/or the filter
(C4) must be replaced.
The tubes inside the milk container (C) must be
cleaned.
The filter (C4) must be replaced.
27
Turn the froth adjustment dial (D1) to CLEAN
(fig. 20).
Turn the dial to the required froth position.
Press "OK " to start descaling or "
descale later. The descaling procedure described
in section "16. Descaling" needs to be performed
as soon as possible.
Press OK to replace or remove the filter, or ESC
to carry out the procedure later. Follow the in-
structions in section "18. Water softener filter".
Clean the inside of the appliance thoroughly,
as described in the section "15. Cleaning". If the
message is still displayed after cleaning, con-
tact a service centre.
The descaling procedure described in section
"16. Descaling" and/or replace or remove the
filter as described in section "18. Water softener
filter".
Turn the froth adjustment dial (D1) to CLEAN
(fig. 20).
Replace the filter or remove it as described in
section "18. Water softener filter".
ESC" to