Using Wi-Fi Direct - Zte AVID 828 User Manual

Hide thumbs Also See for AVID 828:

Quick start manual (17 pages)

Table Of Contents

Table of Contents

Enlarged version

CONNECTING TO NETWORKS AND DEVICES

Connecting to a WPS Network

Wi-Fi Protected Setup (WPS) is a feature that makes it easy to add your phone

to the access points which supply WPS .

You can use one of the following methods to connect your phone to a

wireless network using WPS .

Method one: WPS Button (recommended)

1 . Tap the Home Key >

> Settings > Wi-Fi .

2 . Slide the Wi-Fi switch to the On

3 . Tap > Advanced > WPS Push Button .

4 . Press the WPS button on the wireless router and the access point will

recognize your phone and add it to the network .

Method two: PIN

1 . Tap the Home Key >

> Settings > Wi-Fi .

2 . Slide the Wi-Fi switch to the On

3 . Tap > Advanced > WPS Pin Entry .

4 . The WPS PIN displays on the screen . Enter the PIN into the access point's

setup page .

After entering the PIN, your phone automatically finds the access point and

configures the connection .

Note: For detailed information about the WPS feature of the access point,

please refer to its documentation .

position .

Adjusting Advanced Wi-Fi Settings

1 . Tap the Home Key >

> Settings > Wi-Fi .

2 . Tap > Advanced to adjust the following settings .

• Network notification: Enable to be notified whenever a public network

is available .

• Scanning always available: Let Google's location service and other apps

scan for networks, even when Wi-Fi is off .

• Keep Wi-Fi on during sleep: Choose whether or not to keep Wi-Fi on in

Sleep mode .

• Install certificates: Install certificates needed for connecting to certain

Wi-Fi networks .

• Wi-Fi Direct: Use the Wi-Fi Direct feature .

• WPS Push Button: Connect to a WPS network via the push button

method .

• WPS Pin Entry: Connect to a WPS network via the phone PIN method .

• MAC address: Check the MAC address .

• IP address: Check the phone's IP address .