Advertisement
Quick Links
Installing Your Cisco SPA525 PHONE
Installing Your Cisco SPA5XX PHONE
You will be provided the following in your package to be used to install your new phone(s).
1. The phone base
2. Phone hand set and hand set cord
3. Phone stand
4. Two Ethernet cables. (blue) (red)
491 Lisbon Street, Lewiston, ME 04240
800-520-9911
www.oxfordnetworks.com
1
of 4
Advertisement
Related Manuals for Cisco SPA525
Summary of Contents for Cisco SPA525
- Page 1 Installing Your Cisco SPA525 PHONE Installing Your Cisco SPA5XX PHONE You will be provided the following in your package to be used to install your new phone(s). 1. The phone base 2. Phone hand set and hand set cord 3. Phone stand 4.
- Page 2 Installing Your Cisco SPA525 PHONE 5. Power adapter (if no power over Ethernet switch is being used). Flip your phone base (1) over and you will see the below ports. Follow the instructions for each port to get your phone up and running.
- Page 3 Installing Your Cisco SPA525 PHONE Checking Network Settings If you have connected the RJ 45 cable from your router to the SW Port on the phone, your phone should function for inbound and outbound calls. The buttons for each functional line should be green in color.
- Page 4 Installing Your Cisco SPA525 PHONE 4. Once DHCP is set. Phone should refresh/re-initialize and phone should come up (lines should be green). 5. You can confirm that the phone has a DHCP IP address by going back into the menu (button from step 1).