Part Names And Functions - Mitsubishi SLZ-KA25VA Technical & Service Manual

1

PART NAMES AND FUNCTIONS

Indoor Unit
SLZ-KA25VAL.TH SLZ-KA25VA.TH
SLZ-KA35VAL.TH SLZ-KA35VA.TH
SLZ-KA50VAL.TH SLZ-KA50VA.TH
Horizontal Air Outlet
Sets airflow horizontal automatically
during cooling or dehumidifying.
Wireless remote controller
SLZ-KA25VAL.TH
SLZ-KA35VAL.TH
SLZ-KA50VAL.TH
ON / OFF button
Pushing button starts
operation. Pushing again
stops operation.
MODE SELECT button
This button is used to change
between auto, cooling,
heating and drying operation
modes. (SLZ)
Attention :
Avoid operation of buttons with fingernails or other sharp objects. Sharp objects may scratch remote controller.
Filter
Remove dust and pollutants
from inhaled air
Air Intake
Inhales air from room.
h
ON/OFF
TOO TOO
WARM COOL
FAN SELECT
AUTO COOL
VANE TIME
HEAT DRY
MODE
RESET
2
Grille
Auto Air Swing Vane
Disperses airflow up and
down and adjusts the angle
of airflow direction.
SET TEMPERATURE
button
SET TEMPERATURE
button sets and any
desired room temperature.
TIMER SELECT button
Used for selecting timed
starting or stopping.
FAN SPEED button
This button is used to set
fan speed to low, medium
or high.
VANE CONTROL button
Used to change the airflow
direction.