Prior To First Use; Assembly; Mounting The Collection System; Mounting The Collecting Bin - Garden Groom Midi Instruction Manual

Prior to first use

•
The foil and bag pose a suffocation hazard. Keep children away from the packaging.
• Unpack the machine and the accessories. Using the list of product contents (see "Product contents" section),
check the contents for completeness and possible transport damage. Should you identify any transport
damages, please promptly consult the customer service (see section "Customer service").

Assembly

•
During assembly, do not reach into the cutting unit. The blade is very sharp, you could
injure yourself.
Before you start work, you have to attach the collecting bin (for smaller cuttings) or the collection system (for
larger areas) consisting of the adapter, hose, and collecting bag to the device.

Mounting the collection system

1. If the collecting bin is already mounted on the device, fold the locking lever to the outside and remove
the bin.
2. Set the device down so that the blade is pointing up and hold it in place with one hand on the handle.
3. If necessary, fold the locking lever to the outside with your other hand.
7. Make sure that the adapter is securely seated.
8. Fit the collecting hose on the adapter and apply the Velcro fastener. The fastener should be pulled as tight
as possible around the adapter to prevent the hose from slipping.
9. Connect the collecting hose and bag with the zipper.
Collecting bag
(Similar to that shown)
4. Carefully set the wider end of the adapter on the opening on the
side of the cutting head. Make sure that the adapter end is inserted in the
corresponding brackets on the cutting head.
5. Push the top of the adapter down so that the pin on the bottom of the
locking mechanism audibly locks into place.
6. Fold the lever back to its previous position and push it into the indentation
on the adapter.
Zipper
Collecting hose
Velcro fastener
.8.
Adapter