Troubleshooting; Technical Data; Warranty - Garden Groom Midi Instruction Manual

Troubleshooting

Problem
The device
doesn't start.
The device does
not collect any
cuttings.
The blade is
damaged.

Technical data

Model:
Input voltage:
Nominal output:
Speed without load (rpm):
Sound power level LWA:
Sound power level LPA:
Vibration strength rear handle:
Vibration strength front handle:
Uncertainty factor:
Safety class:
Suited for plants with a diameter of 10 mm.
The specified vibration emission value according to EN 60745.

WARRANTY

This product is covered by a warranty against manufacturing defects subject to the time periods stipulated by
the legislation in force in each country.
Possible Cause
The mains plug has not
been connected to a
socket.
The collection bin and/
or adapter has not been
properly mounted.
The fuse for the socket is
deactivated.
The collecting bin is full.
The hose of the collection
bag is blocked.
The adapter ejection
chute is blocked.
Attention! Risk of Injury!
Immediately disconnect the device from the power supply. / Do not
activate the device! Consult the customer service.
Solution
Insert the plug into the socket.
Remove the collection bin and/or adapter.
Remount it.
Check the fuse. Reinsert the fuse or switch it
back on.
Disconnect the mains plug.
Empty the collecting bin.
Disconnect the mains plug. Remove any cuttings
from the hose if necessary.
Disconnect the mains plug. Remove any cuttings
from the chute end.
GG10
230–240 V~, 50 Hz
300 W
3400/min
84 dB (A)
95 dB (A)
0.98 m/s2
1.324 m/s2
K=1.5 m/s2
II, IP20
.10.