Access Rights, Pin Code - L-Acoustics LA4X User Manual

LA4X
Amplified Controller
user manual
VERSION 4.0
4.3.3

Access rights, pin code

The functionalities indicated in the following table can be locked or protected by a 4-digit pin code defined from
LA NETWORK MANAGER (refer to the LA NETWORK MANAGER video tutorial):
Functionality
Quick access to gains on keys OUT1 to OUT4
LOAD PRESET FACTORY
STORE PRESET
DELETE PRESET
PRESET PARAMETERS (all parameters)
CLEAR GROUP PARAMS
NETWORK ADDRESS
RESET TO FACTORY DEFAULT SETTINGS?
When the protection is enabled, each time one tries to use a protected functionality, the LCD screen displays ACCESS
LOCKED or ENTER PIN, see Figure 24.
In the first case, the functionality cannot be accessed. Press the ESC key to abort.
In the second case, access the functionality entering the pin code as follows (see also Figure 25):
1. Press and hold the OUT 1 key. Or press the ESC key to abort.
Turn the encoder wheel to select the first digit of the pin code.
2.
3. Release the OUT key.
4. Repeat the procedure for keys OUT 2 to OUT 4 and the associated digits.
5. Press the OK key.
If the controller returns to the ? ? ? ? page, it means that the pin code is wrong.
Make corrections repeating the procedure. Or press the ESC key to abort.
Else, the functionality is displayed and can be accessed until you leave the current menu.
Disabling the protection
You can disable the lock / pin code protection only from LA NETWORK MANAGER entering the password
defined for this amplified controller (refer to the LA NETWORK MANAGER video tutorial).
LA4X_UM_EN_4.0
Table 6: Functionalities locked or protected by pin code
Figure 24: Lock and pin code protection messages
Figure 25: Entering a pin code
w w w . l - a c o u s t i c s . c o m
Locked / Pin code protected
Locked
Pin code protected
Pin code protected
Locked
Pin code protected
Pin code protected
Pin code protected
Locked
28