Brauniger IQ Motor+ Operation Manual page 51

Operation Manual IQ Motor+
Radii are indicated in the following format:
Long, Lat centre; Long, Lat start point of Radius; Long, Lat end point of Radius;
rotational direction (+clockwise, - counter-clockwise).
Circles
Circles are indicated in the following format:
Long, Lat centre; Radius in km
We recommend the following procedure:

Select with the button „Download" ( "Laden") a Flytec Air Space file (*.fas, *.fa5 or *txt). You will
now receive a long list and a complex graph.

Click into the list, all Air Space areas appear in blue. Now select with Ctrl + left side mouse
button the single Air Spaces, for zones use Shift + left side mouse button. Select the
Air Spaces being important for you. They shall be displayed on the right side of the screen.
Please consider that in Map mode of the instrument it takes the more time for the screen
layout, the more Air Space areas are in the active zone.

Now alter for the individual Air Space areas the name and description in abbreviations which
are comprehensible to you.

Simplify complex Air Spaces of which only some parts are interesting to you by deleting
key points.

Combine Air Space areas which are nested into each other and for which you are not
permitted to penetrate.

Now you can store this file for later use with "save" ("Speichern").

With „send" ("Senden ") the selected Air Spaces are transmitted to the instrument.
If acoustic is energised, a high pitch beep is audible for each Air Space which was
transmitted successfully. In case of unsuccessful transmittance the tone is somewhat
deeper, e.g. in case of double names. With "received" ("Empfangen") one can check
which Air Spaces are currently stored in the instrument.
Tip: create at first a user Air Space file containing the Air Space in your flight area.
This file may contain numerous Air Space areas. Open this file prior to the flight and download
only the Air Space areas to your instrument which you are likely to approach during this day. .
49