Brinkmann 810-1751-S Owner's Manual page 25

Side
Burner
Valve
Valve
Nozzle
Side Burner
Control Knob
Side Burner
Igniter Lead
Burner Venturi
Bezel
Electrode
Step 5
Insert the pre-attached screws in
the side burner valve assembly
through the holes in the side burner
front panel, then firmly seat the
valve nozzle into the burner venturi .
Slide the burner valve assembly
down in the keyholes on the side
burner control knob bezel as
shown to lock in place . Tighten with
screwdriver .
WARNING: Never use your grill
without leak testing all
gas connections and
hoses. See the section
on "Leak Testing" in
this manual for proper
procedures.
Step 6
Install side burner control knob onto
valve stem .
Step 7
Attach side burner igniter lead wire
to the electrode as illustrated .
24