Petsafe Pet Containment System Operating Manual page 12

My pet reacts
strongly to
the Static
Correction and
has become
fearful.
I was setting
up the Pet
Area and after
I turned down
the Boundary
Control Dial,
the Receiver
Collar would
no longer beep
or correct.
12
• Lower the Static Correction Level.
• Make sure you are in control of the situation
when your pet receives his first Static Corrections
(have him on a leash attached to a separate,
non-metallic collar) and lead him into the Pet
Area and praise him. If your pet remains fearful,
suspend training and start again the next day.
Make sure to end all training sessions on a
positive note with lots of praise and play.
• You may have turned the Boundary Control Dial
down too quickly, causing the Receiver Collar
to go into power-fail mode. This is a safety
feature designed to protect your pet when power
to the Transmitter goes out. With the Receiver
Collar within 5 feet of the Transmitter, turn the
Boundary Control Dial to "8" and reset the
Boundary Zone, making sure to turn the dial
down slowly.
1-800-732-2677