Related Manuals for Petsafe P1-ZB-11
Summary of Contents for Petsafe P1-ZB-11
- Page 1 Pet Screen Door installation guide Model Number P1-ZB-11 PLEASE READ THIS ENTIRE GUIDE BEFORE BEGINNING...
- Page 2 IMPORTANT SAFETY INFORMATION Explanation of Attention Words and Symbols used in this guide This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
-
Page 3: Table Of Contents
Our products and training tools enhance the relationship between pets and their owners. If you have any questions about our products or training your pet, please visit our website at www.petsafe.net or contact our Customer Care Center at 1-800-732-2677. -
Page 4: Kit Includes
Kit Includes Interior Frame with flap and locks Installation Guide Exterior Frame Tools Needed Ruler or Phillips Measuring Tape Rubber Screwdriver Mallet Utility Knife Felt tip marker Level Key Definitions Outer Frame Size: Overall pet door dimensions Cut-Out Size: Dimensions of opening cut in homeowner’s door for proper fit and pet door installation Flap Opening Size: Usable flap size for pet to enter and exit through pet door Interior Frame: Pet door frame with flap and locks Exterior Frame: Pet door frame without flap or locks... -
Page 5: Installation In Screen Doors
2A. Remove the screen door by removing the door hinge pins or by removing screws that hold the door to the hinge. 2B. Place on a raised level surface such as a work bench or a board on saw horses. Place the marked side of door facing up. www.petsafe.net... -
Page 6: Cut Pet Door Opening
Step 3 Cut Pet Door Opening 3A. Separate the Interior Frame from the Exterior Frame. 3B. Place the Interior Frame (with flap) on the underside of the screen door. 3C. Reference the mark made from the pets shoulder height (In Step 1). -
Page 7: Install The Pet Door
4C. Place the screen door back on the hinges. It is not recommended to use the locks if your pet is forceful when using the Pet Screen Door to keep from damaging your screen or the pet door. www.petsafe.net... -
Page 8: Train Your Pet
Step 5 Train Your Pet 5A. Rehang your door and begin training your pet. It may help for you to be on one side of the door and your pet on the other. Lift or tape open the flap and try to talk your pet through the pet door. -
Page 9: Customer Care
One Year Non-Transferrable Limited Warranty This Product has the benefit of a limited manufacturer’s warranty. Complete details of the warranty applicable to this Product and its terms can be found at www.petsafe.net and/or are available by contacting your local Customer Care Center: Radio Systems PetSafe Europe Ltd, 2nd Floor, Elgee Building, Market Square, Dundalk, Co. - Page 10 The limited warranty is non-transferrable and shall automatically terminate if the original retail consumer purchaser resells the Radio Systems Product or transfers the property on which the Radio Systems Product is installed. This Limited Warranty excludes accidental damage due to dog chews;...
- Page 11 www.petsafe.net...
- Page 12 Radio Systems Corporation 10427 PetSafe Way Knoxville, TN 37932 1-800-732-2677 www.petsafe.net 400-1984/1 ©2015 Radio Systems Corporation...
- Page 13 DO NOT PRINT THIS PAGE RSC Part #: 400-1984 Description: GUIDE INSTALLATION P1-ZB-11 Created by: MJ Revision by: TK Material: 100gsm Wood Free Initial Creation Date: 06/11/2015 Paper Approved by: L Taylor Printing: Black Date Approved: 07/24/15 Finishing: Die Cut, Fold,...
Need help?
Do you have a question about the P1-ZB-11 and is the answer not in the manual?
Questions and answers