Mechanical Characteristics; Cosmetic - Philips Id; Mechanical Data Files - Proe Files Required; Location Of Philips Logo - Per Philips Make-Up Sheet - Philips 170A7 Service Manual

17" LCD Color Monitor
There are three factory preset white color 9300K, 6500K, sRGB.
Apply full gray64 pattern, with brightness in 100 % position and the contrast control at 50 % position.
The 1931 CIE Chromaticity (color triangle) diagram (x,y) coordinate for the screen center should be:
Product spec.
9300K CIE coordinates
6500K/ sRGB CIE coordinates X = 0.313 ± 0.02
sRGB CIE coordinates
Production alignment spec.
9300K CIE coordinates
6500K/ sRGB CIE coordinates
sRGB CIE coordinates
Quality Inspection spec.
9300K CIE coordinates
6500K/ sRGB CIE coordinates
sRGB CIE coordinates

5 Mechanical characteristics

5.1 Cosmetic -
5.2 Mechanical data files -
5.3 Location of Philips logo -
5.4 The gap between Panel and front bezel < 0.8mm
5.5 Location of Control icons -
5.6 Color for resin/paint -

5.7 Resins

•
RoHS required
•
WEEE required.

5.8 If paint is used

•
Rohs required
•
WEEE require

5.9 Plastic mold tooling

•
Tooling to be designed to minimize cosmetic defects induced by molding process (sink, blush, weld
lines, gate marks, ejector marks, etc.).
•
Painting to cover up cosmetic defects due to molding is strongly discouraged.

5.10 Plastics flammability

•
All Plastics to be Flame Retardant UL 94-V0 or Better (if monitor weighs less than 18kg; UL94-V0 is
X = 0.283 ± 0.02
X = 0.313 ± 0.02
X = 0.283 ± 0.005
X = 0.313 ± 0.005
X = 0.313 ± 0.005
X = 0.283 ± 0.015
X = 0.313 ± 0.015
X = 0.313 ± 0.015
Philips ID
ProE files required
Per Philips make-up sheet
Per Philips make-up sheet
Per Philips make-up sheet
91
Y = 0.297 ± 0.02
Y = 0.329 ± 0.02
Y = 0.329 ± 0.02
Y = 0.297 ± 0.005
Y = 0.329 ± 0.005
Y = 0.329 ± 0.005
Y = 0.297 ± 0.015
Y = 0.329 ± 0.015
Y = 0.329 ± 0.015