Philips 170A7 Service Manual page 85

17" LCD Color Monitor
3.2.2 DVI Cable NA
3.2.3 Audio Cable
Length.
Connector type.
3.2.4 Software control functions via OSD/control adjustable functions:
(1) PC Analog only Signal Input Mode
Adjustable functions:
st
1 LEVEL
MONITOR SETUP
Exit
Brightness & Contrast Brightness
Color
Position & Size
Input Selection
More Settings
Reset
Serial No.:
(Serial No.)
Timing Mode
Up/Down to Move, ok
to Confirm
Remark : " To move " at OSD window right-bottom.
Remark : Color Temperature factory default setting = 6500K for all regions.
Remark: Audio Selection - Stand-alone – On: Isolate video and audio control input
Stand-alone – Off: Integrate video and audio control input
Mute – On: Turn off Audio input
Mute – Off: Turn on Audio input
Reset - No: Exit
Yes: Auto adjustment for displaying timing mode and recall factory preset
(2) Digital interface OSD: NA
: 1.8 M +/- 50 mm
: 3.5-mini jack with lime color on the both end.
nd
2 LEVEL
Contrast
Original Color, 9300K,6500K, sRGB,
User Define
Horizontal
Vertical
Size
Analog (D-Sub)
Language
Phase/ Clock
Audio Options
OSD Settings
No
Yes
" To adjust " at OSD window left-bottom.
/00 : English, Espanol, Frencais, Deutsch,
Italiano, , Russian
/27 : English, Espanol, Frencais, Portuguess,
S-Chinese
/69,/75,/93,/96 : English, Espanol, Frencais,
Deutsch, Italiano, , S-Chinese
Clock
Stand-alone (On, Off)
Mute (On, Off)
Horizontal
Vertical
85
3rd LEVEL
Full Screen
Native Mode
Fill with Aspect
Phase