Table of Contents
Advertisement
Activating and setting the room monitor
¤
. . . use
Room Monitor
Switch on/off:
¤
Activation: . . . use
Enter destination:
¤
Send alarm to
Internal
External:
number
or select a number from the directory:
Internal:
select the handset
Activate/deactivate two-way talk:
¤
Two Way Talk
Set microphone sensitivity:
¤
Sensitivity
Save settings:
The destination number is displayed in idle display when the room monitor is activated.
Switching off/interrupting the alarm
Switch off the alarm:
Interrupt the alarm:
Deactivating the alarm remotely
Prerequisites:
•
The alarm is forwarded to an external destination number.
•
The receiving phone supports tone dialling.
•
If the alarm is activated via a VoIP connection, the DTMF signalling must take place via SIP
info or RFC2833 (
¤
Accept alarm call
The alarm is deactivated and the handset is in idle status. The room monitor settings on the
handset (e.g. no ringtone) will remain activated until you press the display key OFF.
Reactivate room monitor with the same number:
to select
Additional Features
OK . . . then
to select On or Off
. . . use
Number
. . . use
Handset
Change
OK
. . . use
to select On or Off
. . . use
to select High or Low
Save
¤
In idle status press the display key OFF
¤
Press the End call key
setting on the base station).
Press keys
OK
to select External or
to enter the
. . . use
to
during an alarm
. . . the call is ended
. . . Reactivate (
Room monitoring
Room Monitor activated
07:15
14 Oct
INT 1
Room Monitor
0891234567
OFF
Options
p. 37)
Save
37
Hide quick links:
Advertisement
Table of Contents
