Quick access to numbers and functions
The digit keys
The left and right display keys have a function preset by default, but the keys can be re-assigned
(
p. 25).
You can then dial the number or start the function by simply pressing a key.
Assigning digit keys
Prerequisite: You must assign a number to the digit key.
¤
Press and hold the digit key.
Or:
Briefly press the digit key.
¤
The phonebook opens.
The entry is saved to the corresponding digit key.
If you delete or edit the entry in the phonebook at a later date, this will not affect the
assignment to the number key.
Selecting numbers/changing an assignment
Prerequisite: You must have assigned a number to the digit key.
When the handset is in idle status
¤
Press and hold the digit key: The number is dialled immediately.
Or:
¤
Briefly press the digit key: Press the left-hand display key with the number/name
(abbreviated if necessary) to dial the number.
Or:
Press the display key Change to change the key assignment, or
press the display key Clear Key to delete the assignment.
Assigning display keys
¤
In idle status, press and hold the left or right-hand display key.
assignments is opened.
Choose from the following functions:
Room Monitor
Alarm Clock
Calendar
One Touch Call
Redial
Spot LED:
More Functions...
Call Lists
and
up to
Press the display key QuickDial.
Select entry.
Select entry
Set and activate the room monitor (
Set and activate the alarm clock (
Open calendar (
Set up one touch call(
Show redial list (
LED light (torch function) on/off (
You can also choose further functions:
Show call list (
can be assigned to a number from the phonebook.
OK
OK
p. 35).
p. 34).
p. 17).
p. 16).
p. 33).
p. 32).
Adjusting the telephone settings
The list of possible key
p. 37).
25