Table 33. Removal steps of base cover assembly
Step
Screw (quantity)
1
M2 × 7 mm, wafer-head, nylon-coated (3)
2
M2 × 14 mm, wafer-head, nylon-coated (2)
3
M2 × 4 mm, wafer-head, nylon-coated (1)
Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several kinds.
If the Windows Certificate of Authentication label (COA)
old part with the label attached to the customer, or provide a letter to the customer stating what the label
was originally on the system and what the label part number, serial number, and product key were.
When you replace the base cover, you need to apply the following labels:
Downloaded from LpManual.com Manuals
3
1
1
2
2
1
4
1
is attached to a part that is replaced, return the
Torque
Color
Silver
0.181 Nm
(1.85 kgfcm)
Black
0.181 Nm
(1.85 kgfcm)
Black
0.181 Nm
(1.85 kgfcm)
5
.
Chapter 9
Removing and replacing a FRU
101