With Optional Equipment; Cd/Md Unit; Playing A Cd Or Md - Sony XR-C9100R Operating Instructions Manual

With Optional Equipment

CD/MD Unit

You can control up to 7 CD and MD units with
this unit.
If you connect an optional CD unit with the
CD TEXT function, the CD TEXT information
will appear in the display when you play a CD
TEXT disc.

Playing a CD or MD

1
Press (SOURCE) repeatedly to select the
CD or MD.
2
Press (MODE) until the desired unit
appears.
CD/MD playback starts.
When a CD/MD unit is connected, all the
tracks play from the beginning.
Changing the display item
Each time you press (DSPL) during CD, CD
TEXT, or MD playback, the item changes as
follows:
Elapsed playback time
Disc name* 1
Track name*
Clock
MOTION DISPLAY*
1 If you have not labeled the disc or if there is no
*
disc name prerecorded on the MD, "NO
D.Name" appears in the display.
2 If you play a CD TEXT disc, the artist name
*
appears in the display after the disc name. (Only
for CD TEXT discs with the artist name.)
3 If the track name of a CD TEXT disc or MD is not
*
prerecorded, "NO T.Name" appears in the
display.
4 AII the items above are scrolled in the display
*
one by one in order.
$
$
/Artist name* 2
$
3
$
$
4
You can label CD and CD TEXT discs with a
personalized name using the disc memo
function; refer to "Labeling a CD" (page 29).
However, if you use personalized labels, they
will always take priority over the original CD
TEXT information when such information is
displayed.
Tip
If the name of the MD or CD TEXT disc is too long,
you can scroll it across the display by pressing
(SHIFT), then (2) (N).
Automatically scrolling a disc name
— Auto Scroll
If the disc name/artist name or track name on
a CD TEXT disc or MD exceeds 10 characters
and the Auto Scroll function is on, information
automatically scrolls on the display as follows:
• The disc name appears when the disc has
changed (if the disc name is selected).
• The track name appears when the track has
changed (if the track name is selected).
If you press (DSPL) to change the display
item, the disc or track name of the MD or CD
TEXT disc is scrolled automatically whether
you set the function on or off.
1
During playback, press (SHIFT).
2
Press (3) (SET UP) repeatedly until
"A.Scrl" appears.
3
Press (5) (n) to select "A.Scrl on."
4
Press (SHIFT)
To cancel Auto Scroll, select "A.Scrl off" in
step 2 above.
Note
For some CD TEXT discs with extremely many
characters, the following cases may happen:
— Some of the characters are not displayed
— Auto Scroll does not work.
EN
25