Selecting The Listening Position - Sony XR-C9100R Operating Instructions Manual

Changing the stored surround
effect
Play the disc whose surround mode you want
to change, and follow the steps of "Storing a
surround effect onto the CDs."
Erasing the stored surround effect
Select "DEFEAT" in step 3 of "Storing a
surround effect onto the CDs."
Selecting the listening
position
You can set a delayed time for the sound to
reach the listeners from the speakers.
In this way, the unit can simulate a natural
sound field so that you feel as if you are in the
center of the sound field no matter where you
sit in the car.
EN
1
Press (SOUND) momentarily until "LP1"
appears.
2
Rotate the dial to select the desired
listening
The listening positions appear in the order
shown above.
After three seconds, the display returns to
the normal playback mode.
34
Display Center of sound
window field
LP1 Normal setting
(1 + 2 + 3)
All
LP2 Front part
(1 + 2)
Front
LP3
Right front (2)
Front R
LP4
Left front (1)
Front L
LP5
Rear part (3)
Rear
position.
Adjusting the listening position
1
Press (SOUND) for two seconds.
2
Press (SOUND) repeatedly until the
desired listening position appears.
3
Press (5) ( n).
4
Rotate the dial to adjust the centre of
the sound field to the left or right. Then
set the center of the sound field.
Centre moves to the L (left).
Centre moves to the R (right).
5
Press (5) ( n).
6
Rotate the dial to adjust the centre of
the sound field to the front or rear.
Centre moves to the R (rear).
Centre moves to the F (front).
7
Press (SOUND) for two seconds.
When the effect setting is complete, the
normal playback mode appears.