Connecting Power - 3Com 7608 Quick Start Manual

5. Connecting Power

The Access Point can be powered by the following methods:
•
By Power Over Ethernet (PoE) supplied over the LAN by a 802.3af PoE compliant device such
as a switch or hub.
•
By PoE supplied by the PoE injector included with the Access Point.
Power Over Ethernet (PoE) from the LAN
To power the Access Point using PoE provided by a switch or other 802.3af compliant device,
simply plug the network cable from the device into the Access Point's Ethernet port.
Access Point
Power Over Ethernet from a PoE Injector
To power the Access Point using the 3Com PoE Injector (included with the unit), do the following:
1
Connect the LAN cable from the switch or hub to the Hub/Switch port on the 3Com PoE
Injector (included with Access Point).
2
Next connect a LAN cable from the Ethernet port on the Access Point to the other port on
the PoE injector.
3
Plug the PoE Injector into a properly grounded electric outlet.
Access Point
To Access Point
7
PoE Switch/Hub
To Switch/Hub
Switch/Hub
(non-PoE)
WX12 00 00
LAN Switc Switc h h WX12
Wirel ess ess LAN
95A Wirel 95A
3CRW 3CRW X1206 X1206