Product Description And Specifications; Intended Use; Product Features; Noise/Vibration Information - Bosch PBH 2800 RE Original Instructions Manual

OBJ_BUCH-318-005.book Page 16 Wednesday, December 19, 2012 1:09 PM
16 | English
Products sold in GB only: Your product is fitted with an
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.

Intended Use

The machine is intended for hammer drilling in concrete,
brick and stone, as well as for light chiselling work. It is also
suitable for drilling without impact in wood, metal, ceramic
and plastic. Machines with electronic control and right/left ro-
tation are also suitable for screwdriving.

Product Features

The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Quick change keyless chuck (PBH 3000-2 FRE)
2 SDS-plus quick change chuck
(PBH 3000-2 FRE)
3 SDS-plus tool holder
4 Dust protection cap
5 Locking sleeve
6 Lock ring for rapid-change chuck (PBH 3000-2 FRE)
7 Lock-on button for On/Off switch
8 On/Off switch
9 Thumbwheel for speed preselection
10 Rotational direction switch
11 Release button for mode selector switch
12 Mode selector switch
13 Gear selector (PBH 3000-2 FRE)
14 Release button for gear selector (PBH 3000-2 FRE)
15 Button for depth stop adjustment
16 Wing bolt for adjustment of auxiliary handle
17 Auxiliary handle (insulated gripping surface)
18 Depth stop
19 Handle (insulated gripping surface)
20 Securing screw for key type drill chuck*
21 Key type drill chuck*
22 SDS-plus adapter shank for drill chuck*
23 Keyless chuck (PBH 2900 FRE/ PBH 3000 FRE Set)
1 609 92A 04D | (19.12.12)
24 Drill chuck mounting (PBH 3000-2 FRE)
25 Front sleeve (PBH 2900 FRE/
PBH 3000 FRE Set/PBH 3000-2 FRE)
26 Rear sleeve (PBH 2900 FRE/
PBH 3000 FRE Set/PBH 3000-2 FRE)
27 Extraction sleeve of the dust extraction attachment*
28 Clamping screw for the dust extraction attachment*
29 Depth stop of the dust extraction attachment*
30 Telescopic pipe of the dust extraction attachment*
31 Wing bolt of the dust extraction attachment*
32 Guide pipe of the dust extraction attachment*
33 Universal bit holder with SDS-plus shank*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.

Noise/Vibration Information

Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 89 dB(A); sound power level
100 dB(A). Uncertainty K=3 dB.
Wear hearing protection!
PBH 2800 RE/PBH 2900 RE/PBH 2900 FRE/
PBH 3000 FRE Set:
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
Hammer drilling into concrete: a =19 m/s
h
2
Chiselling: a =16.5 m/s , K=1.5 m/s
h
2
Drilling in metal: a <2.5 m/s , K=1.5 m/s
h
Screwdriving without impact: a <2.5 m/s
h
PBH 3000-2 FRE:
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745:
Hammer drilling into concrete: a = 16 m/s
h
2
Chiselling: a =14 m/s , K=2 m/s
h
2
Drilling in metal: a <2.5 m/s , K=1.5 m/s
h
Screwdriving without impact: a <2.5 m/s
h
PBH 2800 RE/PBH 2900 RE/PBH 2900 FRE/
PBH 3000 FRE Set/PBH 3000-2 FRE:
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
2 2
, K=1.5 m/s ,
2
,
2
,
2 2
, K=1.5 m/s
2 2
, K=1.5 m/s ,
2
,
2
,
2 2
, K=1.5 m/s
Bosch Power Tools